248-276-9640 Weekdays 8-5 EST
Speak With Your Lighting Specialist 248-276-9640 Weekdays 8am-5pm EST
Are you 18 years old or older?
Sorry, the content of this store can't be seen by a younger audience. Come back when you're older.
The Enerlites DWODS-010 is a motion sensor wall switch that combines passive infrared (PIR) technology with 0-10V dimming. The PIR motion sensor features a 180° field of view to provide up to 1200 square feet of coverage area. The sensor has 2 modes and operates lights ON/OFF based on occupancy or vacancy in the area. In occupancy mode, lights turn ON automatically when motion is detected, and turn OFF after no motion has been detected for the pre-selected time delay. In vacancy mode, lights must be turned ON manually, and then will turn OFF automatically after no motion has been detected for the pre-selected time delay.
The motion sensor’s time delay can easily be adjusted from 15 seconds to 30 minutes. The light level and PIR sensitivity are also adjustable. Two press-buttons allow for easy dimming or brightening of lights. When dimmed lights are turned OFF, the device will “remember” what light level was used last and set the lights to that brightness the next time that they are turned ON. This switch is only compatible with dimmable electronic fluorescent ballasts or dimmable LED drivers. The face cover of this receptacle is interchangeable and can be replaced with alternative colors.
| Manufacturer | Enerlites |
| MPN | DWODS-010-W |
| SKU | DWODS-010-W |
| UPC | 883951452421 |
| Voltage | 120/277 Volt |
| Frequency | 60Hz |
| Resistive | 6A @ 120VAC; 3A @ 277VAC |
| Time Delay | 15 Seconds to 30 Minutes |
| Motor | 1/8HP |
| Electronic Ballast | 800VA |
| Coverage | 180 Degrees |
| PIR Coverage | 1200 Square Feet |
| Load Rating | 2mA-30mA |
| Certifications | cULus; Title 24 Compliant |
| Warranty | 5 Year Standard |
Green Electrical Supply is here to help you maximize your green® on all your electrical supply purchases.
Looking for a quote or need help finding an item, simply use our Contact Us form to request a quote, get assistance, or provide feedback. If you're more of a talker, feel free to give us a call at 248-276-9640 during our weekday hours from 8 am to 5 pm EST.
Here's a little tip to make your quote request even smoother: don't forget to copy the SKU from above and include it along with the quantity in your request. It's a small detail that ensures we get you the most accurate and efficient service. And, just a heads up, the SKU is dynamic, especially for products with multiple options. So, be sure to choose your required options first to view the precise SKU.
