SUGGESTED REPLACEMENT:
4 Inch 10 Watt 120V Color Selectable Square LED Direct Wire Recessed Downlight
Options for LED recessed lighting fixtures, whether installing canless wafer light kits or retrofitting your current can lights, have grown rapidly. Canless wafer LED light kits can be used for remodel or new construction LED recessed ceiling downlight projects. LED retrofit downlights are installed utilizing your existing recessed can housing.
The Acuity Lithonia Lighting WF4 SQ S LED (XX)K MW M6 is a 10.3 watt, 4.7" x 1.2" super thin, square, LED recessed down light with a white trim. The 4 inch LED retrofit downlight generates between 614-672 lumens of 3000K or 4000K light. The LED module maintains at least 70% light output for 36,000 hours. The downlight operates on 120V input power via the factory provided, UL recognized, high efficient driver inside the steel remote box with four 7/8" knockouts with slots for pry-out (Note: Not suitable for pulling wires). The ambient operating temperature range is -40°F (-40°C) to +104°F (+40°C). Dimming, down to 10%, is made simple through use of in-wall dimmer switches.
The innovative, slim design allows for easy retrofit, remodel or new construction installation from below the ceiling. With its narrow design, the Wafer LED can be installed in applications with only 2" plenum clearance. Add to those accolades, each LED Wafer down light and remote driver are rated for contact with insulation (IC Rated) and wet location approved, making them ideal for a breadth of both indoor and outdoor residential, hospitality, commercial and multifamily applications.
