248-276-9640 Weekdays 8-5 EST
Speak With Your Lighting Specialist 248-276-9640 Weekdays 8am-5pm EST
Are you 18 years old or older?
Sorry, the content of this store can't be seen by a younger audience. Come back when you're older.
Duro Dyne Dyna-Tite 45 degree eyelets are manufactured of zinc plated cold rolled steel and swaged to the wire rope cable with a hydraulic press. 45 degree eyelet assemblies are available for installation with either a 1/4 inch or 3/8 inch fastener. They are also available both in 90 degree and straight assemblies, and as a kit with the appropriate cable lock
This item is the Duro Dyne Con-Lock Kit - part number 30166 - 4514-10WC3 (R030146). It contains a Con-Lock connector with 2 meters of a looped wire rope cable attached. Utilize the Duro Dyne Con-Lock connector for static working load limits up to 100 pounds.
Suspension systems typically use threaded rod with washers and nuts to construct a support structure. Sizing, cutting and assembling the rods to the complementary parts and fastening them to an anchor point can be very time consuming. The Duro Dyne Con-Lock system is designed for the suspension of all static loads into all concrete types including slagged, cracked, slab and even hollow pot. The Con-Lock is designed to use a 1/4 inch or 6 mm drill bit. Then tapped into place with a standard hammer, No claw back of the anchor is needed for installation. There is no need for any other tools.
With a working load limit of 100 pounds, or 50 Kilograms, the Duro Dyne Con-Lock can be used for most electrical installations. Looking for more possibilities? The Con-Lock is sold with the cable pre-attached in different lengths to solve almost any concrete project static load application.
| Manufacturer | Duro Dyne (Rize Enterprises) |
| MPN | 4514-10WC3 |
| SKU | 30166 (R30146) |
| UPC | 797582121666 |
Green Electrical Supply is here to help you maximize your green® on all your electrical supply purchases.
Looking for a quote or need help finding an item, simply use our Contact Us form to request a quote, get assistance, or provide feedback. If you're more of a talker, feel free to give us a call at 248-276-9640 during our weekday hours from 8 am to 5 pm EST.
Here's a little tip to make your quote request even smoother: don't forget to copy the SKU from above and include it along with the quantity in your request. It's a small detail that ensures we get you the most accurate and efficient service. And, just a heads up, the SKU is dynamic, especially for products with multiple options. So, be sure to choose your required options first to view the precise SKU.
